Product Catalog
All products --
search, filter, find
The complete DÖLCO product range at a glance.
317 Products found
DÖLCO LE-200P
Lightweight mobile dehumidifier in a robust ABS plastic housing. 22 l/24h dehumidification capacity, integrated hygrostat with five levels, R290 refrigerant.
DÖLCO LE-3600
Mobile condensation dryer with 33 l/24h dehumidification capacity, MID-compliant energy meter, and magnetic sensor shut-off. Compact, stackable, R290 refrigerant.
DÖLCO LE-3600F
Like the LE-3600, but with a large handle — comfortably rollable over thresholds and cables. Ideal for mobile drying service providers.
DÖLCO LE-3600 KP
LE-3600 with factory-installed condensate pump (Art. no. 12853) and emergency float. Pumps condensate up to 10 m height — no more tank emptying.
DÖLCO LE-3600 KPF
LE-3600 with built-in condensate pump (Art. no. 12853) and handle. Switches between tank and pump operation — the mobile all-rounder.
DÖLCO LE-3600 KPS
LE-3600 with condensate pump AND two front fans for hose connection. Stationary pump operation — hoses out for cavity, shaft, and foil tent drying.
DÖLCO LE-3600 KPSF
The top variant: LE-3600 with handle, condensate pump, and two front fans for hose connection. Everything in one unit — maximum flexibility.
DÖLCO LE-3600 S
Like the LE-3600, but with two front fans (2 × 62.8 m³/h) for 75 mm hose connection. Ideal for targeted drying in cavities, shafts, and foil tents.
DÖLCO LE-3600 SF
LE-3600 with two hose connections AND handle — quick location change with targeted cavity drying.
DÖLCO LE-3600 blueline
LE-3600 blueline — robust condensation dryer with electronic humidity control and MID-compliant energy meter. 480 W power consumption.
DÖLCO LE-3800
More powerful building dryer with 480 m³/h air circulation, 8 l condensate tank, and combination meter for energy and operating hours (MID compliant).
DÖLCO LE-25000 mini
Powerful condensation dryer with integrated hot gas defrosting, 750 m³/h air circulation, and 14 l tank. Fully operational even under difficult conditions.
DÖLCO 25000W (wall unit)
Stationary wall variant with hygrostat, MID-compliant operating hours counter, and axial fan. For fixed installation in warehouses, archives, and industrial rooms.
DÖLCO LE 25000
Professional unit with 1100 m³/h air circulation, integrated hot gas defrosting, and condensate pump preparation. For large industrial rooms and commercial applications.
DÖLCO K 2000
Compact industrial dryer with hygrostat, axial fan, tube evaporator, and hot gas defrosting. 18 l/24h dehumidification capacity, washable filter.
Replacement filter LE-25000 mini
Original replacement air filter (red version) for the DÖLCO LE-25000 mini condensation dryer. Maintenance interval: as required, at least annually.
AWU1 Leak detection set for sewage pipes using uranine
AWU1
AWU2 Leak detection set for sewage pipes with 3 fluoresceins
AWU 2
DÖLCO Endoscope VE-188508
DÖLCO Endoscope VE-188508
DÖLCO Pipe finder (electromagnetic line locator)
DÖLCO Pipe finder (electromagnetic line locator)
Pressure reducer complete with hose
Pressure reducer for forming gas complete with hose
FLIR Thermal imaging camera Flir E6 WiFi
Thermal imaging camera FLIR E6 WiFi 19,200 pixels, (160 x 120) / colors = 3 Thermal sensitivity <0.06 °C Temperature range -20 °C to 250 °C Field of view 45° x 34° / Focus-free approx. 4 hrs battery life W...
FLIR Thermal imaging camera Flir E8 WiFi
Thermal imaging camera FLIR E8 WiFi 76,800 pixels, (320 x 240) / colors = 3 Thermal sensitivity <0.06 °C Temperature range -20 °C to 250 °C Field of view 45° x 34° / Focus-free approx. 4 hrs battery life W...
FOTRIC TD3 Acoustic camera
Acoustic imaging camera FOTRIC TD3-LD
FOTRIC Thermal imaging camera 345A
Thermal imaging camera FOTRIC 345A L44
FOTRIC_345M_25°
Thermal imaging camera FOTRIC 345M
FOTRIC_345M_44°
Thermal imaging camera FOTRIC 345M
FOTRIC_347A_44°
Thermal imaging camera FOTRIC 347A Resolution: 480 x 360 px Thermal
FOTRIC_348A_44°
Thermal imaging camera FOTRIC 348A
Gas detector TG2 - H2
Gas detector TG2 for leak detection with hydrogen. Flexible gooseneck, fast response time, 5ppm to 0.2% volume concentration.
Hikmicro thermal imaging camera M31
Hikmicro thermal imaging camera M31
Tracer dye water - colorless - 100g
highly concentrated tracer dye for water colorless, glowing blue under UV light. powder form
Tracer dye water - yellow - 100g
highly concentrated tracer dye for water, glowing yellow under UV light. powder form
Tracer dye water - violet - 100g
highly concentrated tracer dye for water, glowing violet under UV light. powder form
Hydrogen leak detector - DÖLCO TG1
Hydrogen leak detector TG1 complete with hand-held measuring head H21, 3 m cable, nylon bag, carrying strap, shoulder strap, headphones, power cable and connection cable for car cigarette lighter
Accessory set for gas detector TG1 or TG2 or pressure gauge
Accessory set for TG1 / TG2 tracer gas measuring device or for pressure gauge in a complete case.
Floor measuring head
Floor measuring head
DOELCO pipe finder SET in practical case
DÖLCO pipe finder SET
DÖLCO 100 Hycon single device with cable
DÖLCO 100 Hycon single device with cable
DÖLCO data logger complete with housing and one sensor
DÖLCO data logger complete with housing and one sensor. Rel. humidity / temperature accuracy 1.8% RH / 0.5°C. Includes power supply and 5m sensor cable. Communication interfaces WLAN, LAN, USB. Pre-conf...
DÖLCO DTA-25 Thermo-Anemometer
DÖLCO DTA-25 Thermo-Anemometer
DÖLCO Hycon 100 complete with case
DÖLCO 100 material moisture meter in a practical carrying case, incl. 2 depth probes, hand electrode, BNC adapter, operating manual
Dölco Hygrotemp Air complete with case
Hygrometer thermometer Hygrotemp Air with calibrated humidity/temperature sensor. Display of relative and absolute humidity, dew point temp, room temp, min/max values, hold function in a practical...
DÖLCO measuring device case Basic V2
Measuring device case Basic
DÖLCO measuring device case without thermography V2
Measuring device case Profi
DÖLCO wall hygrometer / mold warner
DÖLCO wall hygrometer
EB-M Energy Box
Energy box for drying units, 4 x 230V socket and central energy meter MID compliant, housing (LxWxH): 385 x 345 x 162 mm
Hammer electrode for DÖLCO 100
Hand electrode / hammer electrode without cable for DÖLCO 100 for wood moisture or building material moisture measurement
ES measuring probes 280
Depth measuring probe 280mm for DÖLCO 100 measuring device (required in pairs)
ES measuring probes 475mm
Long depth measuring probe 475mm for DÖLCO 100 measuring device (required in pairs) price per piece
FOTRIC C2
Thermal imaging camera FOTRIC C2 L46
FOTRIC C5
Thermal imaging camera FOTRIC C5 L49
FOTRIC TK7
Thermal imaging camera FOTRIC TK7 L49
FOTRIC TK8
Thermal imaging camera FOTRIC TK8 L25
FOTRIC_346A_44°
Thermal imaging camera FOTRIC 346A
GANN HYDROMAT CM-B PRO
CM measuring case complete:
Gann Hydromette BL Compact RH-T
Gann Hydromette BL Compact RH-T flex,
Gann Hydromette blueline compact 2
Hydromette blueline compact b2 with battery, complete in plastic box
Gann Hydromette Compact B
Gann Hydromette Compact B with battery complete in tube packaging
Gann Hydromette UNI 2 Set
Hydromette UNI 2 Set
HIKMICRO - Thermal Imaging Camera Pocket2
HIKMICRO - Thermal Imaging Camera Pocket2
HIKMICRO AD21P Listening Device
Acoustic leak detector Hikmicro AD21P
Hikmicro M20 - 25°
Thermal imaging camera HIKMICRO M20
HIKMICRO Thermal Imaging Camera MiniX
HIKMICRO Thermal imaging camera MiniX
HIKMICRO Thermal Imaging Camera M60
HIKMICRO Thermal imaging camera M60
HIKMICRO Wide-angle lens for G41, G61
HIKMICRO Wide-angle lens for G41, G61
HYDROMAT CM-B STANDARD
HYDROMAT CM-B STANDARD
Hydromette BL E Set3 with electrodes and B55 ball head in case
Hydromette BL E - Set3 with plug-in electrode pair M 6, 10 spare tips each (40 and 60 mm), 1 tin of contact paste, measuring cable MK 8 and carrying case BK 14-I active electrode B 55 BL
Hydromette UNI 1 Set 1 (B50)
Hydromette UNI 1 with active electrode B 50 and carrying case BK 14-1 operating instructions
IR Temperature Measuring Device
Infrared temperature measuring device
ISE Intelligent Control Unit without level sensor
ISE intelligent control unit with integrated socket for connecting devices, including humidity and temperature sensor, integrated WLAN and preconfigured for data exchange with www.fern...
LF100 - Floor Microphone Set
LF100 - Floor Microphone Set
LF100 Extension Rod
LF100 - 1 x extension rod segment
Measuring instrument case IV5
Measuring instrument case - Contents: Thermal imaging camera FLIR E5, material moisture meter DÖLCO Hycon 100 with depth probe and hand electrode, digital hygrometer/thermometer, leak detection system Leckfinder Gann Hydr...
Measuring case large empty with labeling
Measuring instrument case large empty with DÖLCO labeling
Surface Probe
Surface Probe
Dew Point Control ITR2
Intelligent dew point control ITR2 incl. high-precision humidity and temperature room sensor. Connection of up to 4 dew point monitors and up to 4 air dehumidifiers
Thermo Anemometer - TA1
Thermo Anemometer TA1 with telescopic rod 0-5m/s
Hand Probe H21 for DÖLCO TG1
Hand probe H21 for DÖLCO TG1
Hand Probe Extension P12 for TG1
Hand probe extension P12 for TG1
Connection Cable TG1
Connection cable C21 3m
Endoscope Camera DÖLCO VE-36 55 08
Endoscope camera DÖLCO VE-36 with 5.5 mm camera head for pipe and cavity inspections.
DÖLCO Endoscope Camera VE-465515
Compact video endoscope with 5.5 mm camera head and 1.5 m flexible insertion tube. 2-way swivel head 180°, HD sensor 1280 × 720 px, viewing angle 90°. Ideal for pipe, cavity, and damage inspection in confined spaces.
DÖLCO UV Endoscope Camera VE-468520 UV
Professional endoscope with 8.5 mm camera head, 2 m insertion tube, and additional UV LED (365 nm) for fluorescein tracer dye inspection. Normal and UV lighting separately switchable — ideally combined with the AWU2 set for non-destructive silicone joint and sanitary leak detection.
Acoustic Leak Finder LF100 BT
Acoustic leak detection device LF100 BT complete with Bluetooth headphones for comfortable leak localization without cable connections.
DÖLCO RT-M 85
Compact compressor turbine with speed adjustment in a stackable M housing. Pressure or suction operation, 170 m³/h air throughput, 850 W. Ideal for smaller damage up to 25 m².
DÖLCO RT-M 110
Speed-controlled compressor turbine in a stackable M housing. Pressure or suction operation, 190 m³/h air throughput, ±260 mbar, 1.1 kW. Proven for damage up to 60 m².
DÖLCO RT-M 110 D
RT-M 110 with additional germ reduction unit and KISS remote monitoring. Ideal for multi-day continuous use, remotely monitored via fernueberwachung24.de.
DÖLCO RT-M 110 D (without remote)
Like the RT-M 110 D, but without KISS remote monitoring. With integrated germ reduction unit for hygienically safe drying.
DÖLCO RT-M DUO basic
Dual-turbine unit in a stackable M housing — two speed-controlled turbines for the hermetic push-pull method. 2 × 170 m³/h, 2 × 850 W.
DÖLCO RT-M DUO D basic
RT-M DUO with integrated germ reduction unit, without KISS remote monitoring. The hygienic variant for multi-day drying without online monitoring.
DÖLCO RT-M DUO D
RT-M DUO with germ reduction and integrated KISS remote monitoring. Optimized for the hermetic push-pull method in unattended continuous operation.
DÖLCO RT-180 DUO
Large dual-turbine compressor in a VL housing for large-area drying using the push-pull method. 2 × 450 m³/h air throughput, 2 × 1,800 W power.
DÖLCO RT-180 DUO D
Large-area dual turbine with integrated germ reduction. 2 × 450 m³/h air throughput, 300 mbar pressure/suction, 2 × 1.8 kW.
DÖLCO SKV 230-VM
Compact side channel blower in a stackable M housing. Pressure or suction operation, 190 m³/h, ±190 mbar, 1.1 kW. With motor protection switch and overload protection.
DÖLCO SKV 230-VL
High-performance side channel blower in a mobile VL housing. 250 m³/h, ±210 mbar, 1.5 kW. For damage areas up to 120 m².
DÖLCO SKV 230-VXL
High-performance side channel blower in a VXL housing with 2.2 kW power. Pressure and vacuum operation for demanding large-scale damage.
DÖLCO SKV 230-VMD
Compression unit SKV 230-VMD with integrated disinfection system. 230 V, 1.1 kW. Includes 2 m heat-resistant hose.
DÖLCO SKV 400
Powerful three-phase side channel blower SKV-400 VXL with 3 kW. Can be used in both pressure and vacuum mode — for very large damage and industrial use.
DÖLCO WVA-M
Stackable water separator in M housing with 20 l stainless steel container and acrylic glass sight glass. 1,200 l/h pump capacity, at least 10 m delivery head.
DÖLCO WVA-MH
Water separator and HEPA H13 filter in one module — saves the separate microfilter device. Compressor is connected directly to the WVA-MH, the drying cycle runs automatically. With float safety and acrylic glass inspection window.
DÖLCO WVA-7000
Large water separator for demanding drying systems. 100 l stainless steel tank, 7,000 l/h pump capacity, automatic control of connected compressors.
DÖLCO HMF-M
High-performance filter system with HEPA H13 particulate filter and coarse particle filter. 450 m³/h volume air flow, suitable for areas up to 150 m².
DÖLCO MF-150 Microfilter
Universal microfilter with HEPA H13 and high-performance activated carbon filter. 450 m³/h air flow. Connection ports in 38 mm and 63 mm — suitable for small residential drying as well as large-scale systems.
DÖLCO SD-M Silencer
Silencer in stackable M-housing with triple air deflection and G2 coarse dust filter at inlet and outlet. Noticeably reduces sound pressure.
DÖLCO SD-L Special Silencer
Special silencer in L-housing for DÖLCO large-scale systems — reduces sound pressure at high air flow rates.
DÖLCO AT-150 Adsorption Dryer
Single-fan adsorption dryer with 150 m³/h process air in stainless steel housing. Ideal for low temperatures where classic condensation dryers reach their limits.
DÖLCO AT-250 Adsorption Dryer
Medium adsorption dryer with 250 m³/h process air and 1,400 W power. For medium-sized rooms and industrial applications.
DÖLCO AT-450 Adsorption Dryer
Large adsorption dryer with 450 m³/h process air and 1,400 W power. For industry and large areas.
DÖLCO WP230-M Warm Air Processor
Warm air processor for heating process air in insulation drying systems. 3 kW power, 4 outputs × 38 mm.
DÖLCO WP6 Warm Air Processor
Warm air processor with 6 kW heating power via two 230 V/16 A Schuko connections. Double the heating power compared to the WP230-M.
DÖLCO EB-M Energy Box
Energy box EB-M with DSE remote monitoring and MID-compliant power consumption meter. 230 V quadruple distribution, lockable, IP 54.
DÖLCO Grout Cross System
Grout cross complete set for drying the screed insulation layer through boreholes in the grout crosses. Floor coverings remain unchanged.
DÖLCO Adapter / Reducer
Universal plastic reducer for hose connections Ø 80 / 100 / 120 / 125 / 150 mm. For adsorption drying and air conditioning units.
DÖLCO Drying Mobile / Remediation Mobile
Complete equipment for large-area drying in a box trailer — all devices and hoses integrated into one mobile system.
DÖLCO DB 2 Ceiling Drill Stand
Ceiling drill stand DB 2 for overhead drying boreholes. Stabilizes the drill — ergonomic work without fatigue.
Hose Clamp 50–70 Stainless Steel
Robust stainless steel hose clamp, 12 mm bandwidth, for hoses Ø 50–70 mm. Standard consumable for drying operations.
1 Measurement Technology Module 1 Fotric V2
Measurement Technology Module 1 V2:
1 Measurement Technology Module 1 HIK
Measurement Technology Module 1 V2:
1 Measurement Technology Module 2
Measurement Technology Module 2:
1 Measurement Technology Module 3
Measurement Technology Module 3:
1 Measurement Technology Module 4
Measurement Technology Module 4:
1 Measurement Technology Module 5
Measurement Technology Module 5:
1 Measurement Technology Module 6
Module consisting of:
1 Measurement Technology Module 7
Measurement Technology Module 7:
1-Measurement Technology Module 8
Measurement Technology Module 8:
2-Dehumidification Module 1
Dehumidification Module 1:
2-Dehumidification Module 2
Dehumidification Module 2:
2-Dehumidification Module 3
Dehumidification Module 3:
2-Dehumidification Module 4
Dehumidification Module 4:
2-Dehumidification Module 5 V2
Dehumidification Module 5 V2:
2-Dehumidification Module 6 V2
Dehumidification Module 6 V2:
2-Dehumidification Module 7 - V2
Dehumidification Module 7 V2:
3-Insulation Drying Module 01 - V2
Insulation Drying Module 1:
3-Insulation Drying Module 01 V3
Insulation Drying Module 1:
3-Insulation Drying Module 02 - V2 - RT-M110 Extension
Insulation Drying Module 2 V2 - Extension for RT-M110 tower
3-Insulation Drying Module 03
Insulation Drying Module 3:
3-Insulation Drying Module 04 - V2 New
Insulation Drying Module 4:
3-Insulation Drying Module 08
Insulation Drying Module 8:
3-Insulation Drying Module 09 V1 - Duo with Des & without Rem
Insulation Drying Module 9:
3-Insulation Drying Module 09 V2 - Duo with Des & Rem
Insulation Drying Module 9:
3-Insulation Drying Module 09 V2 - Duo with Des & without Rem
Insulation Drying Module 7 - V2
3-Insulation Drying Module 09 V3 - Duo with Des & Rem
Insulation Drying Module 9:
3-Insulation Drying Module 10
Insulation Drying Module 10:
3-Insulation Drying Module 11
Insulation Drying Module 11:
3-Insulation Drying Module 12
Insulation Drying Module 5:
3-Insulation Drying Module 13 V1 - RT-M110 Extension
Insulation Drying Module 13 V1 - Extension for RT-M110 tower
3-Insulation Drying Module 14
Insulation Drying Module 14:
3-Insulation Drying Module 99 - RT-M DUO with Des & without Rem
Insulation drying system adjustable
3-Insulation Drying Module 99 - RT-M DUO without Des & Rem
Insulation drying system adjustable
3-Insulation layer drying module 99 - RT-M DUO V2 w. Des & w/o Füb
Insulation layer drying system adjustable
3-Insulation layer drying module 99 - RT-M DUO V2 without Des & Füb
Insulation layer drying system adjustable
3-Insulation layer drying module 99- RT-M110 V2 - Suction tower
Insulation layer drying system adjustable
DELETE - 3-Insulation layer drying module - RT-M110 with Des & without Füb
Insulation layer drying system adjustable
DELETE - Insulation layer drying module - RT-M110 without Des & Füb
Insulation layer drying system adjustable
DELETE-3-Insulation layer drying module 13 V2 - RT-M110D extension
Insulation layer drying module 13 V2 - extension to RT-M110D tower
DELETE-Insulation layer drying module - RT-M110 V2 w. Des & w/o Füb
Insulation layer drying system adjustable
1 set wall mount for fixed installation of DÖLCO IWT
Wall mount for fixed installation of DÖLCO IWT 1 set = 4 pieces
DÖLCO IWT-130
DÖLCO IWT-130 Infrared Heat Dryer - 130W Dim.: 530 x 355 x 20mm
DÖLCO IWT-300L
DÖLCO IWT-300L Infrared Heat Dryer 300W Dim.: 1040 x 400 x 30mm
DÖLCO IWT-300S
DÖLCO IWT-300S Infrared Heat Dryer 300W Dim.: 540 x 650 x 30mm
DÖLCO IWT-600
DÖLCO IWT-600 Infrared Heat Dryer 600W Dim.: 1040 x 660 x 30mm
DÖLCO IWT-700
DÖLCO IWT-700 Infrared Heat Dryer 700W Dim.: 1280 x 660 x 30mm
IWT mounting set for clamping strut
IWT mounting set for clamping strut -
Clamping strut 1600-2900 for IWT
Clamping strut 1600-2900mm high suitable for mounting IWT heat panels with DÖLCO mounting set
Transport bag for infrared panel IWT-700
Transport bag for infrared panel IWT-700
DÖLCO FD3 Electro-Acoustic Leak Detector
Classic electro-acoustic leak detector for non-destructive localization of leaks on flat roofs. Current flow through water on the roof localizes the leak point acoustically — pinpoint accuracy, without digging.
DÖLCO FD3 Electro-Acoustic with Battery
Like the FD3, but with a built-in battery for autonomous use without a mains connection. Ideal for roofs without a 230 V socket or distant setup points.
FD3 measuring tip (additional)
Additional measuring tip for FD3 electro-acoustic leak detectors (10215 / 11111). Specifically for use on green roofs and hard-to-reach areas.
Reel with auxiliary line for FD3 — 50 m
Reel with 50 m auxiliary line for the FD3 — connection to roof or for seal testing in the basement area.
DÖLCO RG3 Smoke Gas Leak Detection System
RG3 smoke gas leak detection system for continuous smoke gas production. Proven DÖLCO unit for non-destructive localization of leaks on flat roofs.
DÖLCO RG5 Smoke Gas Leak Detection System
RG5 with tracer gas unit — the latest generation of DÖLCO smoke gas generators. With Drive-Control technology, automatic fog regulation (DÖLCO pulse method), and radio remote control up to 30 m. Fully operational in rain and wet conditions.
DÖLCO Fog Fluid 25 l (blue)
Original DÖLCO fog fluid for RG3 and RG5 smoke gas generators. Blue-dyed for visual control, in a 25 l bulk container — economical for frequent users.
DÖLCO Fog Fluid 5 l (blue)
Original DÖLCO fog fluid for RG3 and RG5 smoke gas generators — blue-dyed, 5 l canister. Ideal for occasional use.
DÖLCO High-Temperature Hose d=38 mm (2 m with GK)
DÖLCO high-temperature hose d=38 mm, 2 m length, with GK quick coupling. For hot smoke gas transport between RG3/RG5 and bitumen/foil nozzles.
Accessory kit RG3 / RG5 (large)
Complete accessory kit for RG3 and RG5: 1× high-temperature hose (2 m), 25 l DÖLCO fog fluid, 2× bitumen nozzles, 2× foil nozzles, 3× slotted discs, 1 pair of safety gloves.
Accessory kit RG3 / RG5 (small, Set 299)
Compact accessory kit for RG3 and RG5: 1× high-temperature hose (2 m), 5 l DÖLCO fog fluid, 1× bitumen nozzle, 1× foil nozzle, 3× slotted discs, 1 pair of safety gloves.
Accessory kit RG4
Accessory kit for the RG4: 1× stainless steel injection lance, 1× hollow chisel, 1× bitumen nozzle, 1× foil nozzle, 1× high-temperature resistant hose, 1 pair of safety gloves.
FD5 sensor trolley for TG1 hydrogen leak detector
Sensor trolley for flat roof leak detection with the TG1. A measuring hood covers the test area, the active suction system draws the air under the hood to the measuring head — the concentration is then reset via the blow-out function.
K 3000 — Stationary industrial condensation dryer
Industrial dehumidifier with 450 m³/h air circulation and 44 l/24h dehumidification capacity. For commercial and industrial spaces up to 450 m³, IP21 (optional IP44).
K 7000 HE — Highly efficient industrial condensation dryer
Highly efficient large industrial unit with 1,000 m³/h air circulation and 96 l/24h dehumidification capacity. 230 V connection, optimal for medium to large rooms.
K 8000 — Stationary industrial condensation dryer
Industrial dehumidifier with 1,100 m³/h air circulation and 96 l/24h dehumidification capacity. For rooms up to 1,100 m³ — robust, IP21 (optional IP44).
K 15000 — Large industrial unit
Large industrial unit with 1,800 m³/h air circulation and 160 l/24h dehumidification capacity. For rooms up to 1,800 m³ — very robust, high performance.
K 25000 — Large industrial unit
Large industrial unit with 2,300 m³/h air circulation and 240 l/24h dehumidification capacity. Three-phase connection (400 V), for rooms up to 2,300 m³.
T 350 — Large industrial unit
T-series large unit with 3,500 m³/h air circulation and 360 l/24h dehumidification capacity. Three-phase connection, for halls up to 3,500 m³.
T 500 — Large industrial unit
T-series large unit with 4,600 m³/h air circulation and 520 l/24h dehumidification capacity. Three-phase current (400 V), for halls up to 4,600 m³.
T 750 — Large industrial unit
T-series large unit with 6,200 m³/h air circulation and 750 l/24h dehumidification capacity. Three-phase (400 V), for halls up to 6,200 m³.
T 1000 — Large industrial unit
T-series large unit with 8,000 m³/h air circulation and 980 l/24h dehumidification capacity. Three-phase (400 V), for industrial halls up to 8,000 m³.
T 2000 — Large industrial unit
Largest T-series unit with 16,000 m³/h air circulation and 2,000 l/24h dehumidification capacity. Three-phase (400 V), for industrial halls up to 16,000 m³.
LUW-3000
DÖLCO LUW-3000
Turbo fan large 4500m³/h
DÖLCO Turbo unit Maximum air circulation of a very powerful 4,500 m³/h
Turbo fan S
Turbo fan small Air capacity 350 m³/h Voltage / Frequency: 230 V / 50 Hz electrical power: 80W Housing: Plastic Dimensions (L x W x H): 28 x 24 x 30 cm Weight: 4.0 kg
Hosing for DÖLCO turbo unit
Hosing attachment for DÖLCO turbo unit
DÖLCO HEPA air purifier RLR-135
DÖLCO air purifier RLR-135
DÖLCO HEPA air purifier RLR-800
DÖLCO air purifier RLR-800
Replacement filter set for air purifier RLR-350
Replacement filter set for air purifier RLR-350
Combi-filter H13 + activated carbon RLR-135
Combi-filter HEPA H13 + activated carbon for air purifier RLR-135
Ozonization device OZ3 - 30g/h
DÖLCO OZ3 ozone generator.
Ozonization device OZ4 - 40g/h
DÖLCO OZ4 ozone generator.
Energybox EB-M (IoT)
Intelligent energy box with 4× 230V sockets, MID-compliant energy meter and integrated remote monitoring electronics. Switching actuator for 2 sockets, connection for temperature/humidity sensor.
DÖLCO DSE data logger
Compact data logger for relative humidity and temperature. Accuracy: 1.8% RH / 0.5°C. Connection via WLAN, LAN or USB. Pre-configured for fernueberwachung24.de.
ISE intelligent switching unit
Remote control via KISS server, offline operation without internet, configurable threshold switching and pause intervals for infrared drying.
ISE-P with level sensor
All functions of the ISE plus integrated water alarm with level sensor. Instant alarm in case of water overflow — for safety-critical drying projects.
DSE-I IoT data logger
Integrated IoT SIM card, no router required. Measures RH, temperature and AH. Connection via WLAN, LAN or USB.
Exhaust pipe ZEUS 130 160 220, 1m
Exhaust pipe for ZEUS 130,160,220
DÖLCO electric heater 3 KW
DÖLCO - electric heater 3 KW
DÖLCO electric heater 3 KW
DÖLCO - electric heater 3 KW
DÖLCO electric heater 5 KW
DÖLCO - electric heater 5 KW
DÖLCO electric heater 5 KW
DÖLCO - electric heater 5 KW
DÖLCO electric heater 9 KW
DÖLCO - electric heater 9 KW
DÖLCO electric heater 9 KW
DÖLCO - electric heater 9 KW
Extraction and ventilation set for oil tank
Extraction and ventilation kit consisting of: Suction fitting with quick-closing valve without limit sensor and ventilation cap with foam filter
ITM ANTARES 25 - Oil heater
ITM ANTARES 25 - Oil heater with heat exchanger (indirect)
ITM ANTARES 30 - Oil heater
ITM ANTARES 30 - Oil heater with heat exchanger (indirect)
ITM ANTARES 50 - Oil heater
ITM ANTARES 50 - Oil heater with heat exchanger (indirect)
ITM ANTARES 50 - Oil heater
ITM ANTARES 50 - Oil heater with heat exchanger (indirect)
ITM Antares 70 - Oil heater
ITM Antares 70 - Oil heater with heat exchanger (indirect)
ITM Antares 80 - Oil heater
ITM Antares 80 - Oil heater with heat exchanger (indirect)
Chimney attachment for Antares 30-100
Chimney attachment with cover for Antares 30-100
Air distributor Antares 70-80 - 4-way
Connection 457 mm with 4 outlets of 255 mm each
Air distributor ZEUS 4-way
4 outlets of 300 mm each
Air distributor ZEUS 4-way
4 outlets of 275 mm each
Oil filter assembly for ITM heaters
Oil filter assembly for ITM heaters
Oil tank mobile
Double-walled tank system:
Room thermostat ITM oil heater
Room thermostat for ITM oil heaters
Warm air hose 255mm
Warm air hose diameter 255mm, 7.6m length
Warm air hose 457mm
Warm air hose diameter 457 mm, 12m length
WARM AIR HOSE D280MM
Warm air hose D280mm 7.6m long yellow temp. -20 to +100°C, PVC-coated fabric with black scuff protection
WARM AIR HOSE D305MM
Warm air hose D305mm 7.6m long yellow temp. -20 to +100°C, PVC-coated fabric with black scuff protection
ZEUS 130 C Oil-fired heater
ITM Zeus 130 C - Oil-fired heater with heat exchanger (indirect) and radial fan
ZEUS 160 C - Oil-fired heater
ITM ZEUS 160 C - Oil-fired heater with heat exchanger (indirect) and radial fan
ZEUS 160 E - Oil-fired heater
ITM ZEUS 160 E - Oil-fired heater with heat exchanger (indirect) and axial fan
ZEUS 220C Oil-fired heater
ITM ZEUS 220 C - Oil-fired heater with heat exchanger (indirect) and radial fan
ZEUS 220E Oil-fired heater
ITM ZEUS 220 E - Oil-fired heater with heat exchanger (indirect) and axial fan
ZEUS 80C Oil-fired heater
ITM Zeus 80 C - Oil-fired heater with heat exchanger (indirect) and
FOTRIC 346A
Professional thermal imaging camera for moisture detection, leak detection, and building diagnostics. High-resolution infrared sensor for precise temperature measurements.
3-way distributor
3-way distributor: distribution from 63mm connection to 3x 38mm connections
6-way distributor
6-way distributor: distribution from 63mm connection to 6x 38mm connections
Antiseptics 0.5l
DÖLCO antiseptic for insulation layer and cavity in 0.5l bottle
Bitumen nozzle
Flat roof inlet nozzle for bitumen
Floor nozzle
Floor nozzle with patented locking mechanism
Bypass valve for pressure regulation
Bypass valve for pressure regulation
Diamond core bit with M16 mount
Diamond core bit D 52
DÖLCO antiseptic for insulation layer 5 liters = 1 canister
DÖLCO insulation layer and cavity antiseptic for flushing/disinfection, 5l canister
DÖLCO measuring T-piece 63mm
Holder for humidity sensor
DÖLCO special nozzle D=25 mm, L=500 mm
Special nozzle for drying wooden beam ceilings, drywall walls, or from below through the floor slab. D=25 mm, L=500 mm — the long version. For connection to 38 mm end sleeve.
Fine filter HEPA H13
HEPA H13 filter insert fine filter for microfilter
Humidity and temperature sensor with 2m cable
Humidity & temperature sensor complete with 2m cable for DSE, ISE, RT-M etc...
Filter set for microfilter MF-150 (refill)
Filter set for microfilter, consisting of: 1x HEPA filter, 2x activated carbon filters
Flat roof accessory kit for SKV VX/VL - approx. 150m
Flat roof accessory kit for SKV - VL / VXL
Flat roof accessory kit for SKV VX/VL - approx. 300sqm
Flat roof accessory kit for SKV - VL / VXL
Tile lifting system
Tile lifting system with heating unit and suction lifter (incl. work gloves)
Foil connector
Flat roof intake connector for foil
GRANULATE-WATER-ABSORBING
DÖLCO HSG highly efficient suction granulate 1 can (0.8 kg)
GRANULATE-WATER-ABSORBING
DÖLCO HSG highly efficient suction granulate 1 bucket (4.5 kg)
Heat-resistant hose 38 compl. 2m without GK
Heat-resistant hose 38mm compl. 2m without GK
Core drilling system KS-1 set with drill bit
Core drilling system incl. drill bit and an SDS-PLUS adapter, excluding drill machine.
Measuring T-piece
Measuring T-piece holder for moisture sensors
PUR round cord 25mm
Round profile seal
PVC end sleeve d = 38mm
PVC end sleeve d = 38mm
PVC end sleeve d = 63mm
PVC end sleeve d = 63mm
Reduction_63_to_38mm
Reduction piece from 63mm to 38mm
Hose clamp 32-50 stainless steel 12mm
Hose clamp 32-50 stainless steel 12mm
Slot nozzle 30-1 stainless steel
Slot nozzle 30-1 - made of stainless steel, 1 connector for 38mm hose, width 180mm, slot depth 30mm, slot width 6mm
Slot nozzle 30-1-H
Slot nozzle 30-1-H e.g. for kitchen units
Slot nozzle 30-2 stainless steel
Slot nozzle 30-2 - made of glass-bead blasted stainless steel, 2 connectors for 38mm hose, width 180mm, slot depth 30mm, slot width 6.5mm
Slot nozzle 70-1 stainless steel
Slot nozzle 70-1 - made of glass-bead blasted stainless steel, 1 connector for 38mm hose, width 180mm, slot depth 70mm, slot width 6.5mm
Slot nozzle 70-1-H
Slot nozzle 70-1-H e.g. for kitchen units
Slot nozzle 70-2 stainless steel
Slot nozzle 70-2 - made of glass-bead blasted stainless steel, 2 connectors for 38mm hose, width 180mm, slot depth 70mm, slot width 6.5mm
Slot nozzle corner nozzle — for bathrooms & silicone joints
Corner nozzle for drying in bathrooms and at wall connections. Placed at the edge of the opened silicone joint — tiles do not need to be removed, just opening the silicone joint is sufficient. Sealing with DÖLCO Terostat.
Special connector D=25 mm
Special connector for drying wooden beam ceilings, drywall walls, or from below through the floor slab. D=25 mm, standard length. For connection to 38mm end sleeve.
Special connector D=25 mm, L=300 mm
Special connector for drying wooden beam ceilings, drywall walls, or from below through the floor slab. D=25 mm, L=300 mm — the medium version. For connection to 38mm end sleeve.
Special cork 30x 55/50mm PU 100pcs
1 box of special corks (100 pieces) for sealing drying boreholes 30x 55/50mm
T-piece 63
T-piece 63mm
T-piece d=38mm
T-piece d=38mm
Terostat sealing tape w= 10mm
Terostat sealing tape w= 10mm
Dry drilling set (impact core bit)
Dry drilling unit D=50mm dry drilling set impact 50mm core drilling
Vacuum hose d=38mm
Vacuum hose d=38mm
Vacuum hose d=63mm
Vacuum hose d=63mm
Connecting sleeve 63mm
PVC connecting sleeve 63mm
Connecting sleeve connector 38mm
Connecting sleeve connector 38mm
Hosing set for DÖLCO drying tower RT-M Duo + Desin
Hosing set for DÖLCO drying tower M series with RT-M Duo
Hosing set for DÖLCO drying tower M series
Hosing set for DÖLCO drying tower M series, consisting of: 1 piece heat-resistant hose d=38mm 2 pieces vacuum hose d=38mm pre-assembled.
Manifold pipe ALU 3x 38 2x 63
Manifold pipe ALU 3x 38 2x 63
Accessory package flat roof for AT-150 and AT-250
Accessory package flat roof for AT-150 and AT-250
Accessory package SKV 230 VM/VMD/ RTM Large
Accessory package for VM / VMD / RT-M
Accessory package for SKV 230 VM / VMD / RTM
Accessory package for SKV 230 VM / VMD
Accessory package for compressor SKV-230 VL/VXL - Screed insulation
Accessory package for compressor SKV-230 VL/VXL 4 x 15 m vacuum hose 38 mm, 1 manifold, 2 hose clamps 50 - 70 mm, 15 m vacuum hose 63 mm, 6 floor nozzles, 4 slot nozzles, 5 T-pieces 38 mm, 4 conn...
Drain hose ID 16mm for LE 3600
Drain hose for continuous condensate drainage,
DÖLCO DSEI Data Logger IoT
DÖLCO IoT data logger complete with housing
![External condensate pump [magnetic mounting]](/_next/image?url=%2Fimages%2Fproducts%2F12469.webp&w=384&q=75)
External condensate pump [magnetic mounting]
Condensate pump set for LE-3600 for external mounting via magnetic holder. The condensate is sucked out of the container via a float/suction holder. Delivery head at least 10m.
Condensate pump 14m
Condensate pump for all models delivery head 14m horizontal/vertical
Condensate pump 4m
Condensate pump for all models delivery head 4m horizontal/vertical
Condensate pump for 25000mini 17
Condensate pump for 25000mini 17 incl. 6.5 m hose
Condensate pump DÖLCO 12853
Turns every LE-3600 / LE-25000 mini into a continuous dehumidifier — pump instead of container, plug in, done. With emergency float for safe overflow protection and 7 m hose.
Plastic frame with air filter LE-3600
LE3600 air filter complete with plastic grid housing
Air hose D=75 3m long compl.
DÖLCO air hose for LE-3600 S D=75mm L=3m incl. snap-in fastener
Dew point surface sensor for pipes
Dew point surface sensor for pipes with connection cable suitable for ITR2
Wall mount for K7000
Wall mount for K7000
Wall bracket stainless steel 500mm (pair) set with buffer LE25, K8000
Wall bracket stainless steel (pair) for 4000/10 5000/10 and 25000
Wall bracket stainless steel LE-3600 etc.
Wall bracket stainless steel (pair) for LE3600 and K3000
Wall bracket galvanized 360mm (pair) set with buffer etc. e.g. LE-36
Wall bracket galvanized 360mm (pair) incl. rubber buffer and mounting accessories
Wall bracket galvanized 440mm (pair) set with buffer e.g. LE-25mini
Wall bracket galvanized 440mm (pair) set with buffer
Wall bracket set LE-3600/K-3000 - stainless steel
Wall bracket set for LE-3600 / K3000
Wall bracket set for K8000
Wall bracket set for K8000
BNC adapter
Adapter from BNC plug to 2x 4mm terminal
Filter mat P300S
Universal filter mat for adsorption dryers
Filter mat PPI30 / 5mm
Universal filter mat for dehumidifiers
Filter mat PPI30/10
Universal filter mat for dehumidifiers
GK coupling with nozzle d=38mm
GK coupling with nozzle - 38 mm made of brass
GK coupling with nozzle 19mm
GK coupling with nozzle 19mm (3/4")
IoT retrofit kit
IoT retrofit kit for installation in devices with remote monitoring electronics e.g. RTMDD, RTM110D, EB-M DSE
Mold remediation starter kit
Mold remediation starter kit - with remediation film kit in a practical case. Content: 2.5l SBF, 500ml alcohol, 2 x 125ml additive, gloves, safety goggles, rollers, trash bags, measuring cup
Mold remediation starter kit - refill kit
Refill kit for mold remediation starter kit: Content: 2.5l latex remediation film, 500ml alcohol, 2 x 125ml additive, gloves, safety goggles, rollers, trash bags, measuring cup
Slotted disc for foil nozzle
Slotted disc for foil nozzle
Transport bag for infrared plate IWT-300S
Transport bag for infrared plate IWT-300S
Connecting profiles 100mm for DÖLCO IWT pair
Connecting profiles 100mm for DÖLCO IWT pair